JRCK002 Pod design No Heavy Metal
|Mode||Grin tank pod|
|Heating Coil||Vertical Ceramic Coil System|
|Oil intake hole size||4 * 1.2mm|
|Coil Resistance||1.3 Ω|
|Color||Silver/ black/ gold/ rose gold/ gunmetal/ custom|
|Oil Filling way||Top filling|
Grintank CBD vape pod device . It is an open system for cbd oil and thick oil .Newest vertical ceramic coil pod technology .Fast heating .No burnt taste. smooth draws .1.0 ML capacity. Coil resistance is 1.3 ohm .Inlet hole size is 4*1.2mm . Suitable for wide range of oil viscosities. Whole device size is 98.5*16*7.5 mm. Easy to carry . Bottom Micro-USB charger. Hidden charging port to keep strong power going (durable to the last drop) . Battery capacity is 280mAh . Over charging protect . Working voltages: 3.7 V . Unique side window for exclusive .It can see the oil through. We are accepting free printing logo and any complex pattern. OEM and ODM are welcome . 100% Quality Control .
Packaging & Delivery
Quality Control Process
1. Raw Material Appearance And Measurement Inspection.
2. PCB-board Performance Test
3. Battery Core Capacity Test
4. Heating coil Resistance Test
5. Semi-finished Product Performance Full-inspection
6. Semi-finished Product Smoking Inspection
7. Finished Products appearance Inspection
8. Finished Products Leak-proof Test
9. Finished Product Performance Inspection
|Quantity(Pieces)||1 - 50||51 - 2000||2001 - 20000||>20000|
|Est. Time(days)||5||10||20||To be negotiated|
Accept Payment Type:
T/T .PAYPAL.WEST UNION.
1. Fill a syringe with a blunt tip needle with your desired oil .Insert the needle into the chamber between the center post and the outer tank wall. You can see the oil filling level by the side visible window .
2. Depending on the consistency of oil , heating may be necessary to match the viscosity.
3. Dispense oil into the chamber up to the airflow hole located on the center post. DO NOT OVERFILL as overfilling can cause leaking .
4. Do not fill in the center post. Filling this in will cause blockage of the air path and leakage.
1. Capping will be done by arbor press. When capping .Do not exert too much force .
2. For thicker viscosities. Let the oil settle in the cartridge until the oil is able to reach the bottom of the tank. Then .Cap the cartridge to ensure that proper pressure is utilized to seal the cartridge.
3. After capping .The cartridge must be kept upright and be allowed a minimum of 2 hours for the saturation period.
4. Once capped. The cap cannot be removed.
1. Micro-USB charging port.
2. Over-charging protection.
3. Adapter Charging Voltage is 5V . 0.5 A
4. The indicator light will be on when charging . The indicator light will be off after full charging .
This product is intended for use by persons 18 or older. No to be used by children, women who are pregnant or breast feeding or persons with or at risk of heart disease, high blood pressure, diabetes, or taking medicine for depression .